How do you mic an acoustic guitar?
Start by placing one microphone around the 12th/14th fret and the other at the bridge pointing either at the body or towards the sound hole, 6 – 12 inches away. Adjust each mic so that they sound good on their own. When mixing the guitar sound, often each mic will be panned hard left and hard right.
What microphone is best for recording acoustic guitar?
Best Microphones for Recording Acoustic Guitars in 2020 AKG P420 High-Performance Dual-Capsule True Condenser Microphone. Shure SM81-LC Cardioid Condenser Instrument Microphone . MXL 770 Cardioid Condenser Microphone . AKG Perception 170 Professional Instrumental Microphone . AKG PERCEPTION 170 Professional Instrumental Microphone . MXL 990 Condenser Microphone with Shockmount.
Can you plug a guitar into a mic input?
If you try to plug your guitar directly into your computer’s mic or line-in input jacks using an adapter, you risk damaging your guitar or your computer. The audio input jacks weren’t designed to handle input from your guitar and it won’t work.
How Many Mics does it take to record a guitar?
“The two microphones I use most for recording electric guitars are the Shure SM57 and the Sennheiser MD421, often both, close up, placed at the edge of the speaker, where the speaker centre meets the cone, or, if I’m looking for a more bright sound, dead centre.
How do I make my guitar sound professional?
Capturing a good guitar tone isn’t always easy . Tip 1 – Use a Cardioid Dynamic Microphone. Tip 2 – Position the Microphone Close to the Amp. Tip 3 – Find the Right Tone on the Amp. Tip 4 – Adjust the Position to Adjust the Tone. Tip 5 – Find the Tone in the Context of the Mix. Tip 6 – Use a Reference Track.
Should I record guitar mono or stereo?
In these cases I prefer to use mono because it takes less space and also to double track a lot of the time and split panning again. Of course you can always record in stereo and then just use one mic but it might not be the optimum single mic position.
What do I need to record guitar at home?
Essential guitar recording gear An audio interface with at least 1 or 2 inputs. For electric guitar , a dynamic, condenser or ribbon mic depending on preference. To record an acoustic guitar , a condenser microphone of some kind. For bass guitar , a DI box or bass preamp pedal. A DAW like Logic Pro, Ableton or Pro Tools.
Is the Shure sm57 good for recording?
The SM57 Can Be Used on Studio Vocals. This Post Will Walk You Through How. You can definitely record excellent-sounding vocals with an SM57 if you know what you’re doing. In some cases, an SM57 might even give you better results than a LDC microphone costing 20x more.
Can I plug guitar directly into mixer?
Although the connectors and cables from your typical guitar rig look like they should be compatible with the 1/4″ line-level inputs on a mixing console, they’re not. Plugging your instrument directly into a console’s line-level input jack usually results in a low-level, wimpy signal.
Can I plug my guitar into GarageBand?
Connect your guitar to your iOS device (we’re using an iRig), get your headphones on and turn up the volume on your headphones and guitar . Open GarageBand . It’ll detect your guitar and automatically open the Guitar Amp. Don’t be alarmed that you can ‘t hear your guitar at this point.
Can I play my guitar through my computer?
The easiest way to connect your electric guitar or bass to your computer is to use one of the small guitar audio interfaces on the market. Just connect the cable from your instrument to the interface and you’re ready to rock.