How to finish an electric guitar body

What is the best finish for an electric guitar?

Nitrocellulose is dried by evaporation and allows the application of very thin layers that are fused together. This fading effect between layers makes its restoration / repair much easier than polyurethane or polyester . It is a durable finish that offers good protection.

How do you refinish an electric guitar?

How to Repaint or Restain, or Refinish a Guitar Begin to disassemble your guitar . Take the neck off of your guitar . Remove the hardware from your guitar . Consider Removing your Guitar Bridge Studs. Organize your hardware. Remove the Old Guitar Finish by Sanding. Use an orbital sander.

Does Guitar Finish affect tone?

Color Correcting. Paint color affecting tone is what Billy Corgan critics are scratching their heads over. In a guitar , the wood and finish are coupled and since there’s a lot more wood than finish , the wood has greater effect on tone than paint.

What is the best guitar color?

Best as in most versatile? Think neutral colors: White, black , grey, and natural wood, in that order [1]. Black or white, and shades of greys or natural wood browns all work as classic neutral colors—just like they make good base colors for an outfit.

Can you use polyurethane on a guitar?

Polyurethane and polyester guitar finishes are considered the industry standard; the modern norm if you will. This means that multiple layers of polyester or polyurethane aren’t necessary, unlike nitro finishes that require many. Poly guitar finishes are therefore much easier to use and quicker to apply .

You might be interested:  How to tune a guitar with a built in tuner

Can you repaint an electric guitar?

Yes, you can paint on a guitar . However, it’s not as simple as painting straight onto the existing surface of the guitar because the guitar is already painted and sealed, so these existing layers need to be removed first.

How much does it cost to refinish an electric guitar?

A solid finish on a Fender-style body (i.e. no binding, no logo work etc.) might be as low as $200 from a local luthier – whilst a full refin on a 335 could easily reach $600. Double that if you ask the Gibson restoration department to take on the work.

Can you sand gloss off a guitar?

You can sand a neck’s hard, high- gloss surface, but before you get too enthusiastic with your sandpaper, be sure to choose the right grit! For most glossy necks, 600-grit paper will do the trick (Photo 4). A more aggressive 400-grit paper will also work, but be cautious.

How do you refinish a guitar top?

How to refinish an acoustic guitar Step 1: Begin to take apart your guitar . Step 2: remove the old guitar finish. Step 3: further sanding. Step 4: get the finer crevices in. Step 5: smooth the guitar as much as possible. Step 6: clean up your workspace. Step 7: get a grain filler. Step 8: get it ready for repainting and apply mineral spirits.